Precision Environments
Measurement and validation solutions for cleanrooms, contamination control, filtration, aerosols, airflow and environmental performance.
Precision Environment Measurement & Validation Routes
Start with the measurement outcome rather than the instrument. Choose the relevant controlled-environment, aerosol, filtration or airflow application, then follow the dedicated technical solution.
Cleanroom & Controlled Environments
Qualification and ongoing measurement of cleanrooms and specialised controlled environments, including airborne-particle classification, monitoring, installed-filter integrity, recovery and airflow behaviour.
Cleanroom & Controlled Environment Solutions →
Cleanroom ClassificationClassify airborne particle concentration at defined particle sizes and sampling locations.Explore →
Continuous Cleanroom MonitoringRisk-based fixed-point particle monitoring, trends, alarms and retained records.Explore →
HEPA / ULPA Filter IntegrityEstablish an upstream challenge and scan the installed filter system for local leakage.Explore →
Recovery Time MeasurementMeasure particle-concentration decay following a defined challenge.Explore →
Airflow VisualisationObserve airflow direction, unidirectional behaviour, disturbance and transitions using tracer fog.Explore →
Safety Cabinet TestingFilter-integrity and airflow-visualisation measurement for applicable safety cabinets and separative devices.Explore →
Operating Theatre VerificationMeasurement routes for filter leakage, recovery, airflow visualisation and protected-zone performance where required by the healthcare specification.Explore →Aerosol, Filtration & Airflow
Challenge-aerosol generation and conditioning, filter development and production testing, quantitative airflow verification and environmental measurement.
Aerosol, Filtration & Airflow Test Solutions →
Aerosol Generation & ConditioningGenerate, condition, transport and dilute defined test aerosols for qualification, filtration and research applications.Explore →
Filter Development & Production TestingCharacterise efficiency, penetration, pressure drop and loading under controlled test conditions.Explore →
HVAC Airflow & Performance VerificationMeasure air velocity, volume flow, differential pressure and related airflow quantities.Explore →
Indoor Air Quality & Environmental MeasurementMeasure environmental parameters including CO₂, temperature, humidity, particles and workplace dust using the appropriate instrument.Explore →Technical Selection Support
Describe the environment, the parameter you need to establish and the applicable project or regulatory reference. Primionics will identify the relevant measurement route.