Professional Test &amp; Validation Platforms

Test & Measurement

Oscilloscopes

Bench, PC-based and handheld oscilloscopes — 50 MHz entry through 8 GHz 12-bit high-definition platforms for embedded debug, power electronics, RF time-domain and serial bus validation.

Need oscilloscope guidance?

Share your bandwidth, channel count, resolution requirement and application — we will recommend the right series and configuration from SIGLENT or Pico Technology.

Discuss Requirement

Test & Measurement

Waveform Generators

Arbitrary waveform and function generators from 5 MHz entry through 2 GHz RF AWGs — IQ output, 14–16 bit DAC, EasyPulse and burst modes for stimulus generation, signal simulation and protocol emulation.

10 / 30 MHz active function/arbitrary waveform generator family with 125 MSa/s, 14-bit resolution, EasyPulse and common modulation modes.

SDG800 Series

10 / 30 MHz14-bit125 MSa/s

Up to 60 MHz · 14-bit DAC · 2-channel. Comprehensive modulation, EasyPulse edge control, burst output.

SDG1000X Series

Up to 60 MHz14-bit DACEasyPulse

Dual-channel function/arbitrary waveform generators with 25/30/60 MHz models, 1 GSa/s, 16-bit vertical resolution, 8 Mpts/ch and PRBS output.

SDG1000X Plus Series

25/30/60 MHz16-bit1 GSa/s

Up to 120 MHz · 16-bit DAC · 1.2 GSa/s · IQ modulation output. RF testing, serial bus simulation and arbitrary waveform replay.

SDG2000X Series

Up to 120 MHz16-bit IQ1.2 GSa/s

Up to 500 MHz · dual-channel AFG+AWG · wideband noise · complex modulation. Advanced semiconductor testing and RF mixed-signal stimulus.

Up to 500 MHzAFG+AWGSemiconductor

Up to 500 MHz · 2.4 GSa/s · high-bandwidth 2-channel AWG. High-speed digital stimulus, radar waveform and broadband signal generation.

SDG6000X Series

Up to 500 MHz2.4 GSa/sRadar

Dual-channel arbitrary waveform generator family up to 1 GHz with 5 GSa/s, 14-bit vertical resolution and 512 Mpts memory.

SDG7000A Series

Up to 1 GHz5 GSa/s14-bit

High-performance arbitrary waveform generator with 2/4 channels, up to 5 GHz output, 10/12 GSa/s sampling, 16-bit resolution and deep memory.

SDG8000A Series

Up to 5 GHz10/12 GSa/s16-bit

Test & Measurement

Spectrum Analysers

Bench, real-time and handheld spectrum analysers — EMC pre-compliance, phase noise measurement, 5G NR sub-6 and Wi-Fi 6E coverage, interference hunting and cable/antenna testing.

0–3.2 GHz · −161 dBm DANL · EMI pre-compliance mode · optional tracking generator. Bench analyser for Wi-Fi, Bluetooth, ISM and sub-GHz IoT.

SSA3000X Series

3.2 GHz−161 dBm DANLEMI mode

3.2 GHz · −165 dBm DANL · optional VNA mode · interference hunting. Enhanced performance over the standard SSA3000X.

SSA3000X Plus Series

3.2 GHz−165 dBmVNA option

SSA3000X-R Real-time Series

3.2 GHz · real-time spectrum capture for burst and transient signals. Interference hunting and wireless coexistence testing requiring gap-free coverage.

3.2 GHzReal-timeGap-free

3.2–7.5 GHz · 5G NR sub-6 · Wi-Fi 6E · LTE/NR coverage. Wireless product development, EMC and 5G base station measurement.

SSA5000A Series

3.2–7.5 GHz5G NRWi-Fi 6E

SSM5000A Signal Source Analyser

Phase noise measurement and residual noise characterisation for oscillators, PLLs, synthesisers and clock distributions up to 7.5 GHz.

Phase noisePLL / synth7.5 GHz

9 kHz–7.5 GHz · handheld spectrum analyser + VNA + cable/antenna analyser. 5G/LTE field testing, base station deployment and RF infrastructure work.

9 kHz–7.5 GHzHandheldSA+VNA+CA

Portable spectrum analyser and cable/antenna analyser for field installation, maintenance and RF infrastructure characterisation and troubleshooting.

PortableCable/AntennaField

Test & Measurement

Vector Network Analysers

2-port and multi-port VNAs from 300 kHz to 26.5 GHz — full S-parameters, Smith chart, group delay and multi-port measurement for antenna, filter, amplifier and passive component characterisation.

PC-based

300 kHz–6 GHz (106) / 8.5 GHz (108) · 122 dB dynamic range · full 2-port S-parameters · USB powered · free software + SDK. Portable VNA for field and lab.

PicoVNA 106 / 108

300 kHz–8.5 GHz122 dB DRUSB poweredSDK

0–3.2 GHz · combined spectrum analyser + 2-port VNA. Smith chart, group delay. Cost-effective single instrument for RF design characterisation.

SVA1000X Series

Up to 3.2 GHzSA + VNASmith chart

2/4-port vector network analyser family covering 4.5 / 8.5 / 13.5 / 26.5 GHz configurations for RF component and antenna characterisation.

SNA5000A Series

Up to 26.5 GHz2/4-portVNA

Compact 2-port VNA family with 3 GHz and 6.5 GHz models, up to 125 dB typical dynamic range and time-domain / fixture workflows.

3 / 6.5 GHz2-port125 dB typ.

Multi-port · up to 26.5 GHz · mmWave component characterisation, radar module qualification and high-frequency RF validation.

SNA6000A Series

Up to 26.5 GHzmmWaveMulti-port

Portable 2-port handheld VNA family from 30 kHz to 14 / 20 / 26.5 GHz for field antenna, cable and component measurements.

30 kHz–26.5 GHzHandheld2-port

Test & Measurement

RF Switch Systems & SMU

Programmable RF switch matrices and source/measure units for automated multi-port test systems and precision characterisation.

SSU5000A RF Switch Matrix

Programmable RF switch matrix for automated multi-port test systems — SCPI/LXI controlled signal routing between instruments and DUTs.

SMM3000X Source/Measure Unit

New SMM3000X Series SMU for precision IV characterisation of semiconductors, passive components and materials — launched 2026.

SMUNew 2026IV sweep

Test & Measurement

RF Signal Generators

Analog and vector RF signal generators from 9 kHz to 20 GHz — AM/FM/PM, IQ output, low phase noise, pulse modulation and 5G NR vector signal generation.

SSG3000X Analog Signal Generator

9 kHz–3.2 GHz · AM/FM/PM modulation · −130 dBm phase noise · optional pulse modulation. General-purpose bench RF signal source.

9 kHz–3.2 GHzAM/FM/PM

SSG5000X Analog RF Generator

9 kHz–13.6 GHz · low phase noise · broadband output · pulse modulation. Microwave receiver and LO testing up to 13.6 GHz.

9 kHz–13.6 GHzLow noise

SSG5000A Vector Signal Generator

Vector signal generators with IQ modulation to 6 GHz — wireless protocol testing and complex modulation waveform generation.

Up to 6 GHzIQ modulationVector

SSG6000A Microwave Signal Generator

Microwave analog signal generators to 20 GHz — satellite, radar and microwave receiver test requiring high-frequency stimulus.

Up to 20 GHzRadarSatellite

5G NR · NEW

SSG6082A-V Vector Signal Generator

High-performance vector signal generators to 20 GHz with wideband IQ. 5G NR, LTE and satellite payload test applications.

Up to 20 GHz5G NRWideband IQ

Test & Measurement

DC Power Supplies

Programmable DC power supplies from single-output lab benches through triple-output precision sources to 1.5 kW high-power switching supplies for battery simulation, burn-in and automated power test.

SPD1000X Single-channel Supply

Single-channel programmable DC supply — precise voltage and current output with SCPI remote control. Entry bench supply for lab and education.

Single ch.SCPI

SPD3303X / SPD3303C Series

Triple-output programmable DC supply with LAN/USB control and datalogging — for multi-rail circuit development and board bring-up.

Triple outputLAN/USBDatalog

SPD4000X 4-channel Supply

4-channel precision programmable supply with built-in waveform display, OCP/OVP protection and output sequencing for complex power rail testing.

4-channelBuilt-in measureSequence

SPS5000X High-power Supply

High-power switching supply for high-current device testing, battery simulation and power subsystem validation. Wide output range.

High powerBattery sim.

Up to 1.5 kW

SPS6000X Series — up to 1.5 kW

Up to 1.5 kW programmable switching power supply — battery emulation, EV component testing and high-power burn-in applications.

Up to 1.5 kWAuto batteryEV test

Test & Measurement

DC Electronic Load

Programmable electronic loads for power supply characterisation, battery discharge testing and DUT qualification — CC, CV, CR and CP modes with waveform display.

SDL1000X DC Electronic Load

Programmable electronic load — CC/CV/CR/CP modes · waveform display · battery discharge characterisation · OCP/OVP testing · SCPI/LAN remote control.

CC/CV/CR/CPBattery testSCPI/LAN

Test & Measurement

Digital Multimeters

Bench and system DMMs from 4½ to 6½ digit — high DC accuracy, GPIB/LAN/USB, fast reading rates for QA, calibration, production test and ATE rack integration.

4½-digit bench DMM with LAN/USB — for semi-automated test stations with SCPI-controllable measurement and basic precision lab work.

SDM3045X — 4½ Digit

4½ digitLAN/USB

SDM3055 / SDM3055-SC — 5½ Digit

5½-digit · 0.030% DC accuracy · LAN/GPIB/USB · 1M point storage · 14 measurement functions. Precision lab and production test.

5½ digit0.030% DCGPIB

6½-digit high-resolution for metrology, calibration and precision component measurement — low noise, high stability bench DMM.

SDM3065X — 6½ Digit

6½ digitMetrology

SDM4055A — 5½ Digit System

5½-digit · 220,000 counts · 4,800 readings/s · touchscreen. 2U system DMM for ATE rack integration — launched 2025.

5½ digit4,800 rdg/sTouchscreen

SDM4065A — 6½ Digit System

6½-digit system DMM — low measurement uncertainty, fast reading rate for production and calibration labs. 2U rack-mount system format.

6½ digitHigh accuracy2U rack

Test & Measurement

Data Loggers & DAQ

Temperature, current and multi-channel voltage/DAQ data loggers for long-duration monitoring, environmental recording, precision measurement and motor diagnostics — Pico Technology.

TC-08 Thermocouple Logger

8-channel USB thermocouple logger · all TC types (K, J, T, E, R, S, B, N) · cold junction compensation · long-duration temperature monitoring.

8-ch TCAll TC typesUSB

4-channel precision RTD data logger · 0.001°C resolution · Pt100/Pt1000/resistance measurement · metrology-grade temperature recording.

PT-104 RTD Data Logger

0.001°C4-ch RTDMetrology