Topas GmbH Product Portfolio
Topas GmbHAerosol, Particle Measurement & Filter Test Products
Explore Topas aerosol generation, conditioning, dilution, particle measurement and filter-test technologies for cleanroom qualification, aerosol research, calibration, filter development and production-quality testing. Primionics provides application-focused product selection support in India.
Topas GmbHTopas GmbH
Precision Environment Solutions
Cleanroom, aerosol and particle-measurement technologies for qualification, monitoring, research and filtration workflows.
Topas GmbH
Aerosol Conditioning & Dilution
Dilution, drying, neutralisation, sampling and flow-control systems for preparing representative aerosols before measurement or test exposure.
Aerosol Dilution Systems
DDS 560/C Dynamic Dilution System
Touchscreen-controlled dynamic aerosol dilution system with automatic readjustment, variable 0.5–3.0 L/min sample flow and RS-232 integration for automated aerosol measurements.
Explore
Aerosol Dilution Systems
DDS 560 Dynamic Dilution System
Variable aerosol dilution system for reproducible concentration reduction at sample flow rates from 0.5 to 3.0 L/min, with continuously adjustable dilution and live flow-ratio display.
Explore
Aerosol Drying Systems
DDU 570/H Diffusion Dryer Unit
High-model silica-gel diffusion dryer for water-containing aerosols, providing passive drying at inlet flow rates up to 10 L/min with minimal particle loss.
Explore
Aerosol Drying Systems
DDU 570/L Diffusion Dryer Unit
Short-model silica-gel diffusion dryer for water-containing aerosols, providing passive drying at inlet flow rates up to 5 L/min with minimal particle loss.
Explore
Aerosol Dilution Systems
DIL 540/C Controlled Dilution System
Self-adjusting 1:100 aerosol dilution system for 28.3 L/min particle-counter flow, with automatic ratio control and digital status communication.
Explore
Aerosol Dilution Systems
DIL 541/C Controlled Dilution System
Self-adjusting 1:10 aerosol dilution system for 28.3 L/min particle-counter flow, with automatic ratio control and digital status communication.
Explore
Aerosol Dilution Systems
DIL 544 Mobile Dilution System
Self-adjusting mobile 1:100 dilution system for 28.3 L/min cleanroom particle counters, with battery operation, stainless-steel housing and automatic flow adaptation.
Explore
Aerosol Dilution Systems
DIL 545/C Controlled Dilution System
Self-adjusting 1:100 aerosol dilution system for approximately 3 L/min particle-counter flow, with automatic ratio control and digital status communication.
Explore
Aerosol Dilution Systems
DIL 546/C Controlled Dilution System
Self-adjusting 1:10 aerosol dilution system for approximately 3 L/min particle-counter flow, with automatic ratio control and digital status communication.
Explore
Aerosol Dilution Systems
DIL 550 Static Dilution System
Manual static 1:100 aerosol dilution system for 28.3 L/min flow, providing reproducible particle-concentration reduction while retaining the aerosol size distribution.
Explore
Aerosol Dilution Systems
DIL 551 Static Dilution System
Manual static 1:10 aerosol dilution system for 28.3 L/min flow, providing reproducible particle-concentration reduction while retaining the aerosol size distribution.
Explore
Aerosol Dilution Systems
DIL 552 Custom Static Dilution System
Manual static aerosol dilution system with a customer-specified dilution factor at 28.3 L/min for specialised cleanroom, filtration and aerosol-analysis workflows.
Explore
Aerosol Dilution Systems
DIL 553 High-Flow Static Dilution System
Manual static aerosol dilution system for 56.6 or 50 L/min flow, configurable for 1:100 or 1:10 dilution in high-flow cleanroom and filtration measurements.
Explore
Aerosol Dilution Systems
DIL 554/H High-Flow Mobile Dilution System
Battery-powered mobile 1:100 aerosol dilution system for 56.6 L/min flow, with an optional 50 L/min configuration for high-flow cleanroom validation.
Explore
Aerosol Dilution Systems
DIL 554/T Mobile Dilution System
Battery-powered mobile 1:100 aerosol dilution system for 28.3 L/min flow, supplied with the 1/4-inch hose-connection variant for cleanroom validation.
Explore
Aerosol Dilution Systems
DIL 554/Z Mobile Dilution System
Battery-powered mobile 1:10 aerosol dilution system for 28.3 L/min flow, designed for cleanroom validation without auxiliary pressurised air or additional exhaust.
Explore
Aerosol Dilution Systems
DIL 554 Mobile Dilution System
Battery-powered mobile 1:100 aerosol dilution system for 28.3 L/min flow, designed for cleanroom validation without auxiliary pressurised air or additional exhaust.
Explore
Aerosol Dilution Systems
DIL 555 Static Dilution System
Manual static 1:100 aerosol dilution system for 2.83 or 3.0 L/min flow, intended for compact particle instruments and laboratory aerosol analysis.
Explore
Aerosol Dilution Systems
DIL 556 Static Dilution System
Manual static 1:10 aerosol dilution system for 2.83 or 3.0 L/min flow, intended for compact particle instruments and laboratory aerosol analysis.
Explore
Aerosol Dilution Systems
DIL 557 Custom Static Dilution System
Customer-configured static aerosol dilution system with customised flow rate and dilution factor for specialised cleanroom, filter-test and aerosol-research applications.
Explore
Aerosol Charge Conditioning
EAN 581 Electrostatic Aerosol Neutralizer
Corona-discharge charge conditioner generating positive and negative ions for controlled aerosol neutralisation or unipolar charging, without a radioactive source.
Explore
Sample Preparation & Sieving
EMS 755 Electromagnetic Sieve Vibrator
Electromagnetic sieve vibrator for reproducible wet and dry sieving, fine-particle fractionation and powder feeding. The horizontal and vertical oscillation supports effective separation, including fine particles below 20 µm.
Explore
Blow-By Oil Mist Sampling
GMS 141 Gravimetric Sampling System
Heated gravimetric sampling system for reproducible determination of oil content downstream of blow-by oil-mist separators at engine test stands, using flat-sheet or cartridge absolute filters.
Explore
Flow Control & Aerosol Transport
RFU 564 Regulated Flow Unit
Compact regulated-flow unit providing adjustable and time-stable air or nitrogen flow for both suction and supply operation, simplifying aerosol test setups and conditioning workflows.
Explore
Aerosol Sample Switching
SYS 520 Sample Switching Unit
Automated switching unit for reproducible sampling from two locations—typically upstream and downstream of a filter—plus an integrated HEPA-filtered purge line using a single particle analyser.
Explore
Pressurised-Gas Sampling
SYS 525 Pressurised-Gas Sampling System
Representative sampling and pressure-decoupling system for particle analysis in compressed-air and nitrogen lines at medium overpressures up to 8 bar, designed in line with VDI 2083-7 requirements.
Explore
Isokinetic Sampling Probes
SYS 528 Rectangular Sampling Probe
Rectangular isokinetic sampling probe for installed-filter leakage and integrity scanning at a 50 L/min particle-counter flow, designed according to ISO 14644-3 and VDI 2083-3.
Explore
Isokinetic Sampling Probes
SYS 529 Rectangular Sampling Probe
Rectangular isokinetic sampling probe for installed-filter leakage and integrity scanning at a 28.3 L/min particle-counter flow, designed according to ISO 14644-3 and VDI 2083-3.
Explore
Filter Charge Neutralisation
TDC 584 Filter Neutralisation Cabinet
Controlled conditioning cabinet for electrostatic neutralisation of complete air filters, filter bags and media using isopropanol vapour according to ISO 16890-4, with reduced IPA consumption and monitored operation.
Explore
Filter Charge Neutralisation
TDC 585 Filter Media Neutralisation Chamber
Compact passive conditioning chamber for electrostatic neutralisation of filter media and small filter elements in an isopropanol-saturated atmosphere according to ISO 16890-4.
Explore
Dynamic & Variable Aerosol Dilution
VDS 562 Variable Aerosol Dilution System
Active pressure-drop-compensated dilution system providing continuously adjustable high dilution without an external particle-free air supply, with configurable calibration from 28.3 to 100 L/min.
Explore
Topas GmbH
Aerosol Generators
Liquid atomisers, suspension aerosol generators, dust dispersers, fog generators and calibration-aerosol systems for controlled test and reference aerosols.
Liquid Aerosol Generators
ATM 210/H Atomizer Aerosol Generator
High-mass-flow atomizer aerosol generator for liquid test aerosols in pressurised systems, providing reproducible aerosol output against counter-pressure up to 10 bar.
Explore
Liquid Aerosol Generators
ATM 210 Liquid Aerosol Generator
Counter-pressure-rated atomizer aerosol generator for reproducible nebulisation of liquid test aerosols into pressurised vessels and ducts up to 10 bar.
Explore
Liquid Aerosol Generators
ATM 211 Liquid Aerosol Generator
Corrosion-resistant, counter-pressure-rated atomizer for generating liquid test aerosols in chemically demanding or pressurised systems up to 10 bar.
Explore
Liquid Aerosol Generators
ATM 220 Liquid Aerosol Generator
Versatile compressed-air atomizer for reproducible polydisperse aerosols from pure liquids, salt solutions and particle suspensions in filter, cleanroom and research workflows.
Explore
Special Liquid Aerosol Generators for Filter Testing
ATM 221/D Suspension Aerosol Generator
Suspension aerosol generator with a removable dispersion unit and magnetic stirrer for reproducible particle aerosols used in PM-sensor calibration, validation and filter-testing workflows.
Explore
Liquid Aerosol Generators
ATM 221 Liquid Aerosol Generator
Low-output submerged-nozzle aerosol generator for stable and reproducible liquid aerosol production where low particle concentration and fine adjustment are required.
Explore
Liquid Aerosol Generators
ATM 222 Liquid Aerosol Generator
Differential-pressure-controlled pneumatic aerosol generator for stable low-flow operation, reproducible long-term test aerosols and optional serial remote control.
Explore
Cleanroom Aerosol & Fog Generation
ATM 226 Aerosol Generator
Portable aerosol generator with an integrated low-noise compressor for cleanroom and on-site filter testing without an external compressed-air supply.
Explore
Cleanroom Aerosol & Fog Generation
ATM 228 Mobile Aerosol Generator
Mobile, electronically pressure-controlled aerosol generator with an integrated brushless compressor for reproducible cleanroom and installed-filter testing without external compressed air.
Explore
Liquid Aerosol Generators
ATM 230 Liquid Aerosol Generator
High-output liquid aerosol generator with impaction conditioning for clean submicron aerosol production in large filter-test benches and process-scale research systems.
Explore
Liquid Aerosol Generators
ATM 231 Liquid Aerosol Generator
Moderate-output submerged Laskin-nozzle aerosol generator for stable long-duration liquid aerosol production in HEPA, ULPA and airflow-testing applications.
Explore
Special Liquid Aerosol Generators for Filter Testing
ATM 240/L Suspension Aerosol Generator
High-concentration suspension aerosol generator with integrated drying for producing PSL and other solid-particle aerosols in EN 1822 and ISO 29463 filter-efficiency testing.
Explore
Special Liquid Aerosol Generators for Filter Testing
ATM 240/S Suspension Aerosol Generator
Suspension aerosol generator with integrated drying for producing KCl and other solid-particle challenge aerosols used in ISO 16890 ventilation-filter efficiency testing.
Explore
Special Liquid Aerosol Generators for Filter Testing
ATM 241 High-Output Aerosol Generator
Very-high-output ring-slit aerosol generator with one to four selectable nozzles for large filter-test benches, cleanroom challenge systems and high-throughput aerosol applications.
Explore
Special Liquid Aerosol Generators for Filter Testing
ATM 243 Heatable Oil Aerosol Generator
Heatable motor-oil aerosol generator with one to three selectable nozzles and regulated aerosol temperature for oil-mist separator and filtration testing.
Explore
Cleanroom Aerosol & Fog Generation
CFG 291 Condensation Fog Generator
Portable condensation fog generator for dense, highly visible airflow visualisation in cleanrooms, laminar-flow systems and controlled-environment qualification.
Explore
Calibration Aerosol Generation Systems
FCS 248 Photometer Calibration System
Reference aerosol generation and comparison system for calibrating up to three aerosol photometers against a reference instrument using controlled DEHS aerosol.
Explore
Calibration Aerosol Generation Systems
FCS 249 Mobile Calibration Aerosol System
Mobile NaCl aerosol calibration system with seven concentration stages for field verification of CPCs, electrical aerosol monitors and related particle instruments.
Explore
Solid Aerosol / Dust Dispersers
SAG 410 Series Solid Aerosol / Dust Disperser
Modular solid-particle disperser family using controlled dosing mechanisms for reproducible dust and powder aerosol generation across filter, separator and sensor test applications.
Explore
Solid Aerosol / Dust Dispersers
SAG 420 Solid Aerosol / Dust Disperser
High-mass-flow belt-dosing dust disperser for reproducible powder aerosol generation in engine-intake filter testing, dust loading and large-scale filtration studies.
Explore
ASHRAE Dust Disperser
SAG 440 ASHRAE Dust Disperser
Belt-dosing solid-aerosol generator developed for reproducible dispersion of ASHRAE 52.2 test dust and other fibre-containing powders in ventilation-filter loading, separation-efficiency and dust-monitor evaluation workflows.
Explore
Condensation Aerosol Generator
SLG 270 Condensation Aerosol Generator
Sinclair–LaMer condensation aerosol generator for reproducible monodisperse droplet or solid aerosols, with rapidly adjustable particle size and concentration and a patented screen-bypass unit for extended large-particle operation.
Explore
Topas GmbH
Particle Measurement Instruments
Particle counters, aerosol spectrometers and process photometers for concentration, size distribution and time-resolved aerosol measurement.
Cleanroom Particle Counter
CPA 341 Cleanroom Particle Analyzer
Portable or stationary single-particle light-scattering counter for low-concentration aerosols in gaseous samples — covering 0.3 to 10 µm at a fixed sampling flow of 28.3 L/min for cleanroom qualification cleanroom classification, filter testing and controlled-environment measurements.
Explore
Particle Counters & Aerosol Spectrometers
LAP 323 Aerosol Spectrometer
Dual-wavelength single-particle scattering spectrometer for high-resolution particle-size distribution and particle-number concentration measurement from 0.15 to 40 µm.
Explore
Process Aerosol Monitors
PAM 510 Process Aerosol Monitor
Real-time monitor for simultaneous measurement of mean particle size and particle-number concentration in high-concentration monodisperse aerosols.
Explore
Process Aerosol Photometers
PAP 610 Process Aerosol Photometer
Heated in-line two-wavelength extinction photometer for time-resolved mass-concentration measurement of oil-mist and blow-by aerosols.
Explore
Process Aerosol Photometers
PAP 612 Process Aerosol Photometer
Combined in-line extinction and 90° scattered-light photometer with two wavelengths and two measuring lengths for high-concentration blow-by aerosols and liquid-carryover detection.
Explore
Topas GmbH
Filter & Component Test Systems
Modular and automated systems for filter media, HEPA/ULPA filters, ventilation and automotive filtration, sensors, components and production-quality testing.
Industrial / Intake / High-Flow Filter Test Systems
ABP 115 Engine Intake & Industrial Filter Test System
Automated test system for engine intake and industrial air filters according to ISO 5011, measuring pressure drop, air restriction, dust-loading capacity, gravimetric efficiency and downstream particle size.
Explore
Filter Media Test Systems
AFC 131 Cleanable Filter Media Test System
Compact laboratory system for characterising cleanable filter media according to VDI 3926-2, with automated dust loading, pressure-drop monitoring, separation-efficiency measurement and pulse-cleaning cycles.
Explore
Filter Element Production QC Systems
AFC 132 QC HEPA Production Quality-Control Test System
Automated production quality-control system for integral efficiency and leakage testing of small HEPA filter elements that cannot be scanned, with approximately 30-second cycles and pass/fail evaluation.
Explore
Filter Media & Element Test Systems
AFC 132 Filter Media & Small Filter Element Test System
Flexible test system for filter media and small filter elements, supporting pressure-drop, gravimetric-efficiency, fractional-efficiency and dust-holding measurements across multiple air-filter standards.
Explore
Test Systems
AFC 133 Cleanable Filter Media Test System
Computer-controlled test system for cleanable filter media according to ISO 11057, evaluating differential-pressure behaviour, gravimetric and fractional efficiency, loading capacity and cyclic ageing.
Explore
Aerosol Sensor Test & Calibration Systems
AFC 135 Aerosol Sensor Test & Calibration System
Flexible test platform for development, testing and calibration of active or passive PMx and PNx aerosol sensors using stable, defined solid or droplet aerosols over a wide volume-flow range.
Explore
Filter Element Production QC Systems
AFC 136 Filter Element Production-Control Test System
Automated production-control system for 100% inspection of integral separation efficiency and pressure drop on exhaust filters, HEPA cartridges and other small air-filter elements, with approximately 30-second cycles.
Explore
HEPA / ULPA Filter Test Systems
AFS 150 Automated HEPA/ULPA Filter Scanning System
Fully automated production test system for scanning HEPA and ULPA filter elements, detecting local leaks and determining integral filtration efficiency according to ISO 29463 and EN 1822.
Explore
HEPA / ULPA Filter Test Systems
AFS 151 Robotic HEPA/ULPA Filter Scanning System
Robotic HEPA/ULPA filter test system for automatic two-dimensional and three-dimensional scanning of panel filters, cartridges and V-bank filters, with local leak detection and integral-efficiency measurement.
Explore
HEPA / ULPA Filter Test Systems
AFS 152/A Automated HEPA/ULPA Filter Scanning System
Automated panel-filter scanning system for local leak detection, local-efficiency measurement, integral-efficiency determination and differential-pressure testing according to ISO 29463 and EN 1822.
Explore
HEPA / ULPA Filter Test Systems
AFS 152 Manual HEPA/ULPA Filter Scanning System
Compact HEPA/ULPA production-control system combining manual filter scanning with automated particle measurement, scanned-area documentation and standard-compliant test reporting.
Explore
HEPA / ULPA Filter Test Systems
AFS 155 Oil-Thread HEPA Filter Leak Test System
Visual oil-thread leak test system for integral inspection of HEPA and ULPA filter elements, exposing the upstream side to DEHS aerosol so leaks become visible as rising oil threads downstream.
Explore
General Air Filter Test Systems
ALF 114 General Air Filter Test System
Automated test system for general ventilation air filters, supporting ISO 16890, EN 779 and ASHRAE 52.2 workflows with pressure-drop, gravimetric, fractional-efficiency and dust-holding measurements.
Explore
Blow-By, Oil Mist & Separator Test Systems
BBT 143 Blow-By Oil Content Measurement System
Compact measurement system for determining oil-droplet content in crankcase blow-by gas at engine test rigs, combining gravimetric sampling with fast optical concentration measurement.
Explore
Device, Component, Leakage, Flow & Emission Test Systems
CST 117/M Solar Module Soiling Test System
Laboratory system for evaluating dust-soiling and cleaning behaviour of solar module glass and other surfaces according to VDI 3956-1 under controlled dust, temperature, humidity and airflow conditions.
Explore
Device, Component, Leakage, Flow & Emission Test Systems
DHP 145 Leakage Test System
Computer-controlled leakage test system for components and devices, measuring leak rate as a function of pressure in overpressure or vacuum operation across a wide test-air temperature range.
Explore
Industrial, Intake & High-Flow Filter Test Systems
FCT 113 Fuel Cell Air Intake Filter Test System
Automated fuel-cell air-intake filter test system combining particle filtration, dust loading and gas adsorption/desorption measurements for larger elements and elevated airflow rates.
Explore
Device, Component, Leakage, Flow & Emission Test Systems
FST 144 Flow Scan Test System
Automated flow-scanning test system for characterising downstream air-velocity profiles and turbulence of filters, ducts and other flowed-through components across multiple airflow conditions.
Explore
Industrial, Intake & High-Flow Filter Test Systems
GTS 114 Gas Turbine Intake Filter Test System
High-flow test system for gas-turbine and rotary-machinery intake filters, combining particle, salt and water-endurance testing under adjustable temperature and humidity conditions.
Explore
Industrial, Intake & High-Flow Filter Test Systems
LDP 190 Diesel Filter Differential Pressure Test System
Automated liquid-filter test system for measuring diesel-filter differential pressure according to ISO 4020/6.3, with controlled flow, pressure and temperature plus automated venting.
Explore
Filter Media, Filter Element & Production QC Systems
MBP 116 Manual Filter Media Test System
Space-saving manual test system with a vertical flow channel for multi-parameter characterisation of flat filter media, including pressure drop, gravimetric efficiency and dust holding.
Explore
Cabin Air & Gas Adsorption Filter Test Systems
PAF 111 Cabin Air Particle Filtration Test System
Automated cabin-air filter test system for pressure drop, gravimetric efficiency, fractional separation efficiency and dust loading according to DIN 71460-1 and ISO 11155-1.
Explore
Cabin Air & Gas Adsorption Filter Test Systems
PAF 112 Cabin Air Gas Adsorption Test System
Gas-tight cabin-air filter test system for dynamic adsorption-capacity, breakthrough and desorption measurements with controlled pollutant-gas dosing and downstream gas analysis.
Explore
Cabin Air & Gas Adsorption Filter Test Systems
PAF 113 Combined Cabin Air Filter Test System
Combined cabin-air filter test platform integrating particle-separation and gas adsorption/desorption measurements in one flexible system for comprehensive filter characterisation.
Explore
Blow-By, Oil Mist & Separator Test Systems
SPT 140 Oil Mist Separator Test System
Automated blow-by oil-mist separator test system for gravimetric and fractional separation efficiency, pressure-flow characteristics, pressure regulation and leakage under conditioned aerosol operation.
Explore
Device, Component, Leakage, Flow & Emission Test Systems
VCT 121 Vacuum Cleaner Filtration Test System
Automated vacuum-cleaner filtration test system for particle-emission, dust-retention and filtration-efficiency measurements according to EN 60312, with manual service functions and software-guided test sequences.
Explore